Description
Application
The Warmstad Alumia FMD heating mat with aluminium foil is applied as a supplementary system for comfortable floor heating. The system can be used under laminate, parquet or carpet. It is applicable for all types of premises and can be easily installed both on a new surface or on the existing floor in case of repair works, especially when it is highly important to keep a low thickness of the floor construction.
Construction
The Warmstad Alumia FMD heating mat is a thin self-adhesive double-core heating mat covered with aluminium foil on one side. The Warmstad Alumia FMD heating mat is fitted up with a cold lead, a reliable coupling and end termination. Thanks to the cable fixation on the mesh – there is no need to adjust the wire spacing and to fix the cable on the floor surface. Due to only one connection wire, the double core mat construction makes the process of installation easier and reduces installation cost.
Features
- Safe solution for laminate and parquet flooring
- Electrical safety due to earthing
- Cost and energy saving system
- Easy installation
Installation
For the installation of the heating mat a thermostat with an appropriate temperature sensor is required. The temperature sensor is also embedded in the cement mortar. It should be placed in a corrugated tube in the middle of one cable loop. The thermostat should be mounted on the wall in the most suitable place for you. Applicable norms, rules and data sheets as well as instructions and manuals are to be followed! For detailed installation instructions please use the installation manual.
Technical Data
| Rated voltage | 230 VAC |
|---|---|
| Power | 150 W/m² |
| Maximum operation temperature | 80 °C |
| Minimum operation temperature | –10 °C |
| Minimum storage temperature | –20 °C |
| Minimum installation temperature | –10 °C |
| Installation width | 0,5 m |
| Cold lead length | 4 m |
| Cable diameter | 1,18–1,62 mm |
Reviews
There are no reviews yet.