Description
Application
Warmstad Tropix heating mat is applied as a main or a supplementary floor heating system. The system can be easily laid into the mortar screed or into the tile adhesive layer (8–10mm). The system can be used under any covering of your choice: tile, marble or carpet. It is applicable for all types of premises and can be easily installed both on a new surface or on the existing floor in case of repair works, especially when it is highly important to keep a low thickness of the floor construction.
Design
The double-core heating mat Warmstad Tropix is made of a shielded double-core cable, fixed on a fiber mesh. The Warmstad Tropix heating mat is fitted up with a cold lead, a reliable coupling and end termination. Thanks to the cable fixation on the self-adhesive mesh – there is no need to adjust the wire spacing and to fix the cable on the floor surface. Due to only one connection wire, the double-core mat construction makes the process of installation easier and reduces installation cost.
Features
- The best solution for premises with low ceilings
- Cost and energy saving system
- Wide range of power outputs
- Approved long-life performance
- Self-adhesive mats
- Easy installation
Installation
For the installation of the heating mat a thermostat with an appropriate temperature sensor is required. The temperature sensor is also embedded in the cement mortar. It should be placed in a corrugated tube in the middle of one cable loop. The thermostat should be mounted on the wall in the most suitable place for you. Applicable norms, rules and data sheets as well as instructions and manuals are to be followed! For detailed installation instructions please use the installation manual.
Technical Data
| Rated voltage | 230 VAC |
|---|---|
| Power | 100, 150, 200 W/m² |
| Maximum operation temperature | 90 °C |
| Minimum operation temperature | –10 °C |
| Minimum storage temperature | –20 °C |
| Minimum installation temperature | –10 °C |
| Installation width | 0,5 m |
| Cold lead length for 100 & 150 W/m² | 2 m |
| Cold lead length for 200 W/m² | 4 m |
| Cable diameter | ~3,5–5,0 mm |
Reviews
There are no reviews yet.